Lowara 5SC4 Scuba Pump

Lowara
SKU:
LS5SC4
£894.00 (Inc. VAT)
£745.00 (Ex. VAT)
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Lowara 5SC4 Scuba Pump
APPLICATIONS
  • Water supply from primary water supply tanks or reservoirs, 6” wells, basins and watercourses.
  • Sprinkler irrigation systems.
  • Pressure boosting with pump directly inserted in tank or well.
  • Rain water harvesting.
  • Car washing system.
  • Pressurization on board ship
  • Air purification/humidification systems
  • Filtration systems
  • Water recycling systems
CHARACTERISTIC DATA
  • Delivery: up to 10,8 m3/h at 2850 rpm.
  • Head: up to 100 m at 2850 rpm.
  • Motor power: 0,55 to 2,2 kW.
  • Maximum operating pressure: 10 bar.
  • Single-phase version: 220-240 V, 50 Hz 2 poles (2850 rpm).
  • With built-in automatic reset overload protection.
  • Cable Length 20m
  • Mid Curve Performance 4.2m3 (70lt/min) @3.2bar
OPERATING CONDITIONS
  • Temperature of pumped liquid: Standard version: 0 to 40°C/Potable water version: 0 to 23°C.
  • Vertical/Horizontal installation
  • Maximum immersion depth: 17m
  • Maximum permissible quantity of suspended sand: 25 g/m3
  • Maximum quantity of chloride at 20°C: 200 PPM
  • Passes solids: 1SC: up to 1 mm, 3SC, 5SC, 8SC: up to 2 mm
CONSTRUCTION CHARACTERISTICS
  • The liquid end is located underneath the electric motor, which is cooled by the pumped liquid.
  • Impellers are radial centrifugal type, made of technopolymer.
  • Diffusers, outer sleeve, motor casing, suction screen and shaft extension are made of stainless steel.
  • Head is made of microcasted stainless steel.
  • Ease of installation and maintenance due to plug-in power supply cable and float switch
  • Potable water version available upon request.
  • The electric motor is protected by a double seal system with an oil chamber.
  • Sand abrasion resistant impellers
New Lowara Model # Old Model Equivalent
3SC4 2SC5
3SC5 2SC7
3SC7 SC209
3SC8 2SC11
5SC4 4SC7
5SC5 4SC9
5SC6 4SC11
5SC8 4SC11*w/Higher Pressure*