Divertron by DAB is a submersible electronic multi-impeller pump for clean water designed to increase water pressure, rainwater reuse, gardening and irrigation in residential building service. Divertron is ideal for use in rainwater recovery systems and to increase water pressure from a cistern or a tank, which can be used for example for garden watering or vegetable garden. Divertron integrates a pressure switch, a flow sensor and the control electronics for an automatic on and off switch. The automatic operation allows the pump to start and stop autonomously according to the system's requirements and protects it from the run dry. The pump is supplied with an integrated start capacitor (it is inside a compartment accessible without disassembling the pump), a non-return valve and a 15-meter power cable with a plug. The pump is available with technopolymer anti-debris filter or with connection for float suction kit (X version).
Mid curve performance of approx 2.8m³/h @ 3.0bar
Flow rate: from1 m3/h to 5,4 m3/h
Head up to: 45 m (900 version), 30 m (650 version)
Maximum immersion depth:12 m
Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
Liquid temperature range: From 0°C to +35°C
Maximum immersion depth: 15 m
Flanges, thread: 1" (supplied as standard with a four-section fitting reducer)
Pump maximum diameter:160 mm
Impeller/s material: Technopolymer
Maximum number of starts: 20/h
Protection class: IP 68
Motor insulation class: F
Single phase power input: 230 V 50 Hz
Power cable (m) and plug: 15 m H07RNF with power plug
Possible type of installation: Fixed or movable in a vertical position
Dimensions:Divertron 900A: 534x160 mm
Multi-impeller submersible pump with integrated electronic for automatic switching on and off. There are versions with two or three impellers available.
The pump is designed for pressurization, gardening and irrigation in residential building service.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and impellers in technopolymer to resist corrosion and oxidation. The delivery has an integrated non-return valve. There are version with antidebris filter in technopolymer or fitting with brass insert for use with float suction kit (the X version).
CONSTRUCTION FEATURES OF THE MOTOR
Asynchronous motor. Motor shaft in stainless steel AISI 416 + AISI 304. Integrated starting capacitor and thermal protection against overheating of the
motor.
FEATURES OF THE ELECTRONIC
The electronics allow automatic switching on and off. The pressure switch and the flow sensor are integrated. Dry running protection. Quick access to the
capacitor compartment.
Click for Tech Sheet Click for Installation Guide Click for Product Brochure
Dab
Dab
