Dab Easybox Diver Variable Speed Pump
The 7” multi-stage electronic pump with variable speed drive for clean water designed for use in wells, cisterns or tanks. The pump can be used submerged, partially submerged or on the surface (with the appropriate accessory). It is suitable for pressurization, reuse of rainwater, gardening activities and irrigation in residential building service. The pump can also be installed horizontally. Equipped with PLC (PowerLine Communication) and Wi-Fi technology. DConnect Box 2 supplied as standard. There is an X version with 1” union and kit X which includes 1 meter suction pipe and float to prevent the suction of impurities from the bottom. The entire pump is IP 68 certified. With the DOC68 accessory (supplied separately) the pump becomes an IP 68 surface pump to be used in positive suction. Certified version for drinking water available on request.
CONSTRUCTION FEATURES OF THE PUMP
Technopolymer pump body to resist corrosion and oxidation. Integrated non-return valve. Integrated debris filter. Overpressure valve, in case of completely submerged installation, with the freezing of the water in the external pipes, the valve prevents the damage to the pump. On the pump body there is a air-vent valve that improves priming during the first installation or in the event of emptying the tank/well, and a stainless steel handle to move the pump. Integrated 0,04 liter expansion vessel sized to prevent the pump from cycling in the event of small leaks and to compensate for water hammer. No maintenance or recharging is required. The coupling between the three impellers in technopolymer, the floating ring and the smoothing disc both in stainless steel allow a limited wear of the hydraulics and a more precise alignment of the components. Suction height can be adjusted using the appropriate accessory (included): 3,5, 4, 6 or 8 cm.
CONSTRUCTION FEATURES OF THE MOTOR
High efficiency Permanent Magnet submersible motor cooled by the pumped liquid. hydraulic side of the motor shaft in AISI 303 stainless steel. Double mechanical seal in oil chamber where the seal on the motor side is subjected only to submersible pressure (1 bar), while the other side is subjected to operating pressure (up to 5,5 bar) ensuring that the pump is watertight. Electronically protected motor. Quick coupling/release cable to facilitate installation inside tanks or cisterns. Tear-off power cable connection.
FEATURES OF THE ELECTRONIC
The electronic operation allows the pump to start and stop autonomously Variable speed drive for operation according to the system requirements.Working pressure adjustable from 1 to 5,5 bar and protects against dry running. NFC (Near Field Communication) pocket for the use of a float sensor (supplied separately) which can be connected without opening the pump maintaining a watertight seal. Thanks to the PLC communication technology, the pump transmits data through the power cable to the DConnect Box 2.
DCONNECT BOX 2
Thanks to the DConnect Box 2 and the DConnect app it is possible to check and manage the system pressure, alarms and the amount of residual water in the tank directly from your smartphone or tablet. DConnect Box 2 supplied as standard.
TECHNICAL DATA
- Flow rate maximum: 7,2 m3/h
- Head up to: 55 m
- Maximum immersion depth: 12 m standard version
- Type of pumped liquid : Water Clean, free from solid or abrasivesubstances, non-viscous, non-aggressive, non-crystallized and chemicallyneutral
- Free passage: 2 mm
- Minimum suction depth: 110 mm
- Minimum level of water: 35 mm
- Liquid temperature range: from 0°C to +55°C
- Minimum and maximum ambient temperature: <0°C / +50°C
- Maximum immersion depth: 15 m
- Adjustable constant pressure: pre-set 3 bar, adjustable from 1 to 5,5 bar
- Outlet connection: Threated 1” 1/4
- Pump maximum diameter : 185 mm
- Impeller/s material:Technopolymer with ring impeller in AISI 304 stainless steel
- Maximum number of starts: 60/h
- Protection class: IP 68
- Non-stop service: yes
- Motor insulation class: F
- Power cable (m) and plug: 15 m with plug
- Single phase power input: 230 V 50 Hz / 60 Hz
- Possible type of installation: Fixed, horizontal or vertical. Submerged orsemi-submerged. It can be installed on the surface, with positive suction,in a vertical position with the DOC68 accessory (supplied separately).
This model comes in 3 options
- Easybox Diver
- Easybox Diver X
- Easybox Diver X With Float and suction Supplied
X version with suction kit for suction at a higher level.
Version for drinking water WRAS, ACS, NSF.
Certification: WRAS, ACS, NSF (only model for dirking water) are pending approval
Esybox Diver is the first electronic submersible pump with integrated inverter and user interface via smart phone remote control. The Dconnect Box 2 is an external device that can also wirelessly connect to the internet to monitor and control the system quickly and easily with the DConnect App. Electronics and connectivity are combined to make for an efficient and versatile product suited to the needs of every user. A thousand solutions in one for residential domestic pressurisation.
Dimensions
Standard
- Width 580mm
- Height 895mm
- Depth 747mm
- Weight 39 KG dry
X & X with Float and suction
- Width 580mm
- Height 895mm
- Depth 747mm
- Weight 39 KG dry
1 Year Warranty
5-7 Working days for Delivery
Click for Product Brochure Click for Installation Guide Click for Technical Brochure