Hunter Flow-Clik Sensor Receptacle Tee Body SCH80
Hunter
£103.87 - £149.00
(Inc. VAT)
£86.56 - £124.17
(Ex. VAT)
(No reviews yet)
Write a Review
Hunter
Hunter Flow-Clik Sensor Receptacle Tee Body SCH80
Hunter Flow-Sync SCH80 Sensor Receptacle Tee
- The Flow-Sync is a simple and economical solution for metering and reacting to actual flow conditions. A proven water saver, the Hunter Flow Sync (HFS) connects to the ACC and I-Core controllers to measure actual flow, and provides automatic reaction to high or low flow conditions during irrigation. The Flow-Sync is designed for use on pipe sizes up to 4 inches. When installed in conjunction with a master valve, the HFS can be a key source in preventing water waste resulting from line breakage.
| Flow-Clik Diameter | Operating range (L/min) | |
|---|---|---|
| Minimum | Suggested Maximum* | |
| 1" (25mm) | 7.6 | 64 |
| 1.5" (40mm) | 19 | 132 |
| 2" (50mm) | 37.8 | 208 |
| 3" (75mm) | 106 | 454 |
| 4" (100mm) | 129 | 738 |
- Simple two wire connection to ACC and I-Core controllers (up to 1000 ft/300 m)
- Feeds flow data (gallons or litres) to controller, for flow recording and monitoring purposes
- Robust waterproof construction (used with appropriate FCT tees for pipe diameter, see table)
- Provides station level flow monitoring for reaction to high or low flow conditions
- Prevents damage and waste from leaks and breaks in piping system
- Notes: * Good design practice dictates the maximum flow not to exceed 1.5m/sec. Suggested maximum flow is based upon Class 200 IPS plastic pipe
- Barrel Nipple out of the Sensor Tee (2 in Total)
Tee Only - Flow-clik sold separately
Click for Product Brochure
