DAB Dtron 3X 35/120

DTron is DAB’s new line of electronically switched submersible pumps for water pressurization in residential environments.

DAB DTRON 3 - Same as DTRON 2 but with added water level gauge and the ability for smart control using a COM BOX screen or a 'DConnect Box 3' connecting to a smartphone app.

DTron 3 by DAB is a 7 inch submersible electronic multi-impeller pump designed for use in wells, cisterns or tanks. It can be used submerged, partially submerged or on the surface, with DOC68 (supplied separately). DTron 3 is suitable for use in residential building service to increase water pressure, reuse of rainwater and to water the garden or irrigate small vegetable gardens. DTron 3 integrates the electronics for automatic switching on and off. The suction height is adjustable from the bottom up to 8 cm. It is possible to connect a float without compromising the watertight of the pump thanks to the NFC (Near Field Communication) pocket. Com Box included, it allows to set the cut-in pressure and to control the alarms, it communicates with the pump through the PLC technology (PowerLine Communication), without other connection cables if not the electrical power.

DTRON Formats and Applications:

DTRON X VERSION -Dtron X is the version of the Dtron that a float and suction can be fitted to collect water at such a level as to avoid the pumping of debris and mud found at the bottom of wells and tanks. This makes it the perfect solution for applications where water quality is critical.

For well installations, Irrigation, rain water harvesting with a floating pickup means dust and debris will no longer be a problem.

WRAS, ACS, NSF Approved.

Technical Data:

• Working pressure adjustable from 1 to 5,5 bar
• Flow rate maximum: 7,2 m3/h
• Head up to 45 m
• Type of pumped liquid: Water clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
• Free passage: 2 mm
• Minimum suction depth: 110 mm
• Minimum level of water: 35 mm
• Liquid temperature range: 0°C / +50°C
• Minimum and maximum room temperature: <0°C / +50°C
• Adjustable constant pressure: From 1 to 5,5 bar
• Outlet connection: Threaded 1” 1/4
• Protection class: IP 68
• Motor insulation class: F
• Power cable (m) and plug: 15 m with plug
• Single phase power input: 230 V 50 Hz

Technical Data

• MAXIMUM FLOW RATE up to 7.5 m3/h
• MAXIMUM HEAD UP TO 45mts
• Mid Curve Performance: 2.9m3/hr @ at 2.8 bar
• P1 up to 1 Kw
• P2 NOMINAL up to 0,67 Kw (0,9 HP)
• MAXIMUM IMMERSION DEPTH7 to 12 m
• MAX AMBIENT AND LIQUID TEMPERATURE: +50 °C
• FACTORY CUT-IN: 2.4 bar (±0.2)
• DELIVERY FLANGE OR THREAD: threaded from 1” 1/4
• DIMENSIONS: DTron 3: 651x185 mm
• PUMP MAXIMUM DIAMETER: 185 mm.
• Possible type of installation: Fixed, horizontal or vertical. Submerged
• Comes with Water level Measurement
• Comes with Com Box and DConnect box 2

 The DConnect Box 2 allows access to the DAB cloud service. With the new App, you can manage and monitor the pressure of the system, the alarms and the residual availability of water in the tank directly from your smartphone or tablet, wherever you may be!

DTron 3 is, in this way, the first submersible pump to have a display

BLEEDING VALVE COM BOX

Benefits during installation and all use. The bleeding valve permits immediate priming upon initial installation and

guarantees correct operation of the pump at all times.