DAB Divertek 650 A with Float Switch

 

Divertek by DAB is a submersible multi-impeller pump for clean water, designed to increase water pressure, rainwater reuse, gardening and irrigation in residential building service.

Divertek is ideal for the use in rainwater recovery systems and for water drawing from a cistern or a tank. The water can be used, garden watering or vegetable garden without using the water from the aqueduct. There are manual and automatic (with float) versions available. The automatic version has a single-phase motor, and a float switch for protection against dry running.

Divertek does not require a control panel. The thermal protection is integrated. The starting capacitor is integrated and accessible without disassembling the pump. The Divertek pumps are equipped with a retractable carrying handle, a technopolymer anti-debris filter, a non-return valve, and a 15-meter power cable with Schuko plug. A four-section reducer fitting is supplied as standard.

Highly recommended UK-Italian manufacturer DAB.

• Flow rate maximum: From 1 m3/h to 5,4 m3/h
• Mid curve performance of approx 2.5m³/h @ 2.2bar
• Head up to: 45 m (900 version) 30 m (650 version) 25 m (500 version)
• Maximum immersion depth: 12 m
• Type of pumped liquid : Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
• Minimum and maximum room temperature: 0°C / +35°C
• Room temperature: 0°C / +40°C
• Outlet connection: 1" (supplied as standard with a four-section fitting-reducer)
• Pump maximum diameter: 160 mm
• Impeller/s material:Technopolymer
• Maximum number of starts: 20/h
• Motor insulation class: IP 68
• Motor insulation class: F
• Single phase power input: 230 V 50 Hz
• Power cable (m) and plug: 15 m H07RNF with power plug
• This model requires a Pump starter.

Submersible multi-impeller pump for clean water, designed for pressurization, rainwater reuse, gardening and irrigation in residential building service.
Multi-impeller pump with built-in non-return valve and debris filter. There are versions with 2 or 3 impellers, automatic or manual. The pump has
been renewed to further increase its reliability and ergonomics in transport (the handle has been entirely redesigned). Quick access to the capacitor
compartment. A four-section fitting-reducer is supplied as standard.

CONSTRUCTION FEATURES OF THE PUMP
Pump body and impellers in technopolymer to resist corrosion and oxidation. Technopolymer anti-debris filter. Automatic version equipped with float
switch for protection against dry running. Removable non-return valve.

CONSTRUCTION FEATURES OF THE MOTOR
Submersible asynchronous motor. Motor shaft in stainless steel AISI 416 + AISI 304. Integrated starting capacitor and integrated thermal protection
against overheating of the motor. 15 meter power cable with plug included.